PA12 DX9303 BLACK

 

VESTAMID® DX9303 black
聚酰胺12

Evonik Degussa GmbH  
    
 Technical Data   
    

产品说明

High-viscosity, plasticized, heat- and light-stabilized, impact-modified polyamide 612 compound for extrusion

VESTAMID DX9303 is a PA 612 extrusion compound developed for the production of tubing systems with higher requirements for heat resistance.

The melting point of VESTAMID DX9303 is about 35°C higher than PA 11 and PA 12 compounds, allows higher peak temperatures in use. Thereby this compound fulfills the increased demands resulting from higher

temperatures in the engine compartment. If it is intended to use VESTAMID DX9303 for fuel lines, certain preconditions must be observed. The Technical Marketing assists you in finding the suitable VESTAMID compound.

At temperatures above 100°C tubings of VESTAMID DX9303 allow a higher pressure load than tubings made of PA 12 compounds with comparable flexibility.

The material absorbs only little moisture. Therefore dimensions and properties of parts are nearly unaffected through ambient conditions.

The process temperatures should be in the range of 240-270°C. More information about processing and storage you will find in the brochure „Handling and Processing of VESTAMID."

总体

材料状态 • 已商用:当前有效   
资料 1 •  Technical Datasheet (English)
  
Search for UL Yellow Card •  VESTAMID®
  
供货地区 • 北美洲 • 欧洲  
添加剂 • 冲击调节器 • 增塑剂  
 • 热稳定剂 • 紫外线稳定剂  
    
 • 尺寸稳定性良好 • 抗紫外线性能良好 • 热稳定性 
性能特点 • 改良抗撞击性 • 良好的柔韧性 • 吸潮性差 
 • 经增塑 • 耐热性,高 • 粘度,高 
用途 • 管道   
外观 • 黑色   
形式 • 颗粒料   
加工方法 • 挤出   
    
物理性能  额定值 单位制 测试方法 
密度  1.05g/cm³ ISO 1183 
机械性能  额定值 单位制 测试方法 
拉伸模量  850MPa ISO 527-2 
拉伸应力 (屈服)  38.0MPa ISO 527-2 
拉伸应变 (屈服)  26% ISO 527-2 
断张率  > 200% ISO 527-2 
冲击性能  额定值 单位制 测试方法 
简支梁缺口冲击强度    
-30°C, 完全断裂  11kJ/m² ISO 179/2eA 
23°C, 局部断裂  92kJ/m² ISO 179/1eA 
简支梁缺口冲击强度   ISO 179/1eU 
-30°C  无断裂  
23°C  无断裂  
悬壁梁缺口冲击强度 3 (-40°C)  无断裂 SAE J844 
   SAE J2260 
Impact Strength   DIN 73378 
23°C 4  No BreakJ  
as molded: -40°C  No BreakJ  
热性能  额定值 单位制 测试方法 
熔融温度 5  211°C ISO 11357-3 
1 / 3

 
 
 
 
 
 
VESTAMID® DX9303 black
聚酰胺12
Evonik Degussa GmbH   
      
  补充信息 额定值 单位制 测试方法 
     
  Hoop Stress - at Burst  DIN 53758 
  23°C 34.0MPa   
  60°C 20.4MPa   
  100°C 14.5MPa   
  120°C 12.3MPa   
      
  挤出 额定值 单位制   
  熔体温度 240 到 270°C   

备注
1 通过这些链接您能够访问供应商资料。我们尽量保证及时更新资料;不过您可以从供应商处了解最新资料。

2 一般属性:这些不能被视为规格。

3 tubing 8x1mm, after 24 hrs/110°C

4 72 hrs/150°C

5 2nd Heating
 

PA12 TR90副牌料,PA12 TR90原料,PA12 TR90水口料,PA12 TR90改性料,PA12 TR90眼镜料,电话0769-87795123
版权所有:东莞市双帮塑胶原料有限公司    网址:http://www.pa12tr90.com/
粤ICP备12050428号-3