NSF饮用水处理HPPA高性能聚酰胺,NSF饮用水处理HPPA,HPPA Omnix® FC-9050塑料是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,ROHS报告,REACH报告  SVHC报告,COA出厂报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123  微信:13549213581  联系电话:13549213581肖生

 
NSF饮用水原料,NSF61饮用水原料,NSF51饮用水原料,NSF14饮用水原料,NSF饮用水ABS,NSF饮用水PP,NSF饮用水TPU,NSF饮用水POM,NSF饮用水PSU,NSF饮用水TPE,NSF饮用水PVDF,NSF饮用水PEI,NSF饮用水PE,NSF61饮用水报告,NSF51饮用水报告,NSF14饮用水报告,NSF饮用水原料物性表,NSF饮用水原料UL黄卡,NSF饮用水原料MSDS报告,NSF饮用水原料SGS报告,NSF饮用水原料ROSH报告,NSF饮用水原料COA出厂报告等相关资料
 
NSF饮用水处理HPPA, NSF 51,玻璃纤维增强材料50%,
Omnix® FC-9050
高性能聚酰胺
Solvay Specialty Polymers
Technical Data
 
产品说明
Omnix® FC-9050 is a 50% glass-fiber reinforced high-performance polyamide. It is hot-water moldable and intended for use in components requiring superior mechanical properties even after moisture absorption.
 
Omnix® FC-9050 is characterized by high stiffness and strength, very good impact properties, good dimensional stability and high flow properties. This material is an economical alternative for food service applications using die-cast alloys.
 
Omnix® FC-9050 is approved for food contact and meets FDA regulations for Omnix® FC-9050 NT 000 (natural) and Omnix® FC-9050 BK 000 (black) based on clearances granted by FCN 001242 for repeated use food contact applications with all food types, under FDA conditions of use B through H as described in Tables 1 and 2 of 21 CFR 176.170(c).
 
It processes readily using conventional injection molding machines and methods. Water-cooled molds are suitable for use with this grade.
 
Black: Omnix® FC-9050 BK 000 
Natural: Omnix® FC-9050 NT 000 
 
总览
材料状态 • 已商用:当前有效
资料 1 • Technical Datasheet
UL 黄卡 2 • E95746-102425493
搜索 UL 黄卡 •  Solvay Specialty Polymers
•  Omnix®
供货地区 • 北美洲 • 欧洲 • 亚太地区
填料/增强材料 • 玻璃纤维增强材料, 50% 填料按重量
• 尺寸稳定性良好 • 可喷涂的 • 流动性高
特性 • 高刚性 • 快的成型周期 • 热水可成型性
• 高强度 • 良好抗撞击性 • 优良外观
用途 • 电器用具 • 食品服务领域
机构评级 • NSF 51
RoHS 合规性 • RoHS 合规
外观 • 黑色 • 自然色
形式 • 粒子
加工方法 • 水温模具注塑成型 • 注射成型
部件标识代码 (ISO 11469) • >PAMXD6/66-GF50<
物理性能 额定值单位制 测试方法
密度 / 比重 1.60g/cm³ ASTM D792
收缩率 4 内部方法
垂直 0.50%
流动 0.20%
吸水率 (24 hr, 23°C) 0.27% ISO 62
机械性能 额定值单位制 测试方法
拉伸模量 17000MPa ISO 527-2
拉伸应力 (屈服) 235MPa ISO 527-2
拉伸应变 (断裂) 2.1% ISO 527-2
弯曲模量 15000MPa ISO 178
弯曲应力 340MPa ISO 178
冲击性能 额定值单位制 测试方法
悬壁梁缺口冲击强度 13kJ/m² ISO 180/1A
无缺口伊佐德冲击强度 75kJ/m² ISO 180
热性能 额定值单位制 测试方法
热变形温度 (1.8 MPa, 未退火) 248°C ISO 75-2/A
熔融温度 260°C ASTM D3418
 
Omnix® FC-9050
高性能聚酰胺
Solvay Specialty Polymers
可燃性 额定值 单位制 测试方法
UL 阻燃等级 HB UL 94
补充信息
Typical values shown tested on Dry as Molded samples. Standard Packaging and Labeling:
 
Omnix® FC-9050 resin is packaged in foil lined, multiwall paper bags containing 25 kg (55 pounds) of material. Individual packages will be plainly marked with the product number, the color, the lot number, and the net weight. 
 
注射 额定值单位制
干燥温度 80°C
干燥时间 4.0 到 12hr
料筒后部温度 250°C
料筒前部温度 285°C
加工(熔体)温度 275 到 290°C
模具温度 80 到 120°C
注射说明
Drying:
 
Omnix® FC-9050 resin is shipped in moisture-resistant packages at moisture levels according to specifications. It should be dried before molding because excessive moisture content will result in reduced mechanical properties and processing issues, such as excessive nozzle drooling, foaming and splay visible on the molded parts. 
 
Recommended drying conditions are as follows: 
 
Type of drier: Desiccant 
Temperature: 80°C (175°F) 
Time: 4-12 hours 
Dew point: -30°C (-22°F) or lower 
 
Polyamides oxidize in the presence of oxygen at high temperatures. Therefore drying temperatures above 80°C should be avoided, particularly for light colors or color-controlled parts. 
 
Injection Molding:
 
Omnix® FC-9050 resin can be readily injection molded in most screw injection molding machines. A general purpose screw is recommended, with minimum back pressure. The melt temperature should be between 275°C and 290°C (527°F and 554°F). Generally this can be achieved with barrel temperatures from 250°C (482°F) in the rear zone gradually increasing to 285°C (545°F) in the front zone. Mold temperature should be between 80° and 120°C (176° and 248°F). 
 
Set injection pressure to give rapid injection. Adjust holding pressure to one-half injection pressure. Set hold time to maximize part weight. Transfer from injection to hold pressure at the screw position just before the part is completely filled. 
 
Storage:
 
Omnix® compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. It is recommended that Omnix® resins be dried prior to molding following the recommendations found in this datasheet and/or in the Omnix® processing guide. 
 
 
 
 
NSF饮用水处理HPPA高性能聚酰胺,NSF饮用水处理HPPA,HPPA Omnix® FC-9050塑料是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,ROHS报告,REACH报告  SVHC报告,COA出厂报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123  微信:13549213581     联系电话:13549213581肖生  
 
 
NSF饮用水原料,NSF61饮用水原料,NSF51饮用水原料,NSF14饮用水原料,NSF饮用水ABS,NSF饮用水PP,NSF饮用水TPU,NSF饮用水POM,NSF饮用水PSU,NSF饮用水TPE,NSF饮用水PVDF,NSF饮用水PEI,NSF饮用水PE,NSF61饮用水报告,NSF51饮用水报告,NSF14饮用水报告,NSF饮用水原料物性表,NSF饮用水原料UL黄卡,NSF饮用水原料MSDS报告,NSF饮用水原料SGS报告,NSF饮用水原料ROSH报告,NSF饮用水原料COA出厂报告等相关资料               
 
 
 
 
 
 
 
 
 
 

NSF饮用水原料,NSF61饮用水原料,NSF51饮用水原料,NSF14饮用水原料,NSF饮用水ABS,NSF饮用水POM,NSF饮用水PSU,NSF饮用水PVDF,NSF饮用水PEI,NSF饮用水HDPE,NSF饮用水PA12,NSF饮用水共聚多酯,电话0769-87795123
版权所有:东莞市双帮塑胶原料有限公司    网址:http://www.pa12tr90.com/
  • 粤ICP备12050428号-3

    粤公网安备 44190002001498号