NSF饮用水处理聚酰胺 610,NSF饮用水处理PA610,PA610 TECHNYL eXten® D 219WFC V50 BLACK塑料是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,ROHS报告,REACH报告  SVHC报告,COA出厂报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123  微信:13549213581  联系电话:13549213581肖生

 
NSF饮用水原料,NSF61饮用水原料,NSF51饮用水原料,NSF14饮用水原料,NSF饮用水ABS,NSF饮用水PP,NSF饮用水TPU,NSF饮用水POM,NSF饮用水PSU,NSF饮用水TPE,NSF饮用水PVDF,NSF饮用水PEI,NSF饮用水PE,NSF61饮用水报告,NSF51饮用水报告,NSF14饮用水报告,NSF饮用水原料物性表,NSF饮用水原料UL黄卡,NSF饮用水原料MSDS报告,NSF饮用水原料SGS报告,NSF饮用水原料ROSH报告,NSF饮用水原料COA出厂报告等相关资料
 
NSF饮用水处理PA610,NSF 61,DVGW W270,FDA食品接触的合规性, 饮用水接触许可, 泵件, 阀门/阀门部件
TECHNYL eXten® D 219WFC V50
BLACK
聚酰胺 610
Solvay Engineering Plastics
Technical Data
 
产品说明
TECHNYL eXten® D 219WFC V50 Black is a polyamide 6.10, reinforced with 50% of glass fibre, heat stabilized with organic stabilizers, for injection moulding. This grade offers lower water uptake, higher dimensional stability and enhanced chlorine resistance versus standard PA 6.6. It offers too an enhanced corrosion resistance, a reduction in lead levels versus standard metal solutions and an increase in ease of processing and part design freedom versus metal solutions and other plastics. It is used for cold and warm water plumbing components including, but not limited to, components in contact with drinking water systems globally where elevated levels of chlorine could be present.
总览
材料状态 • 已商用:当前有效
资料 1 • Technical Datasheet
搜索 UL 黄卡 •  Solvay Engineering Plastics
• TECHNYL eXten®
供货地区 • 北美洲 • 拉丁美洲 • 亚太地区
• 非洲和中东 • 欧洲
填料/增强材料 • 玻璃纤维增强材料, 50% 填料按重量
添加剂 • 热稳定剂
• Heat Stabilized - Organic • 可更新资源 • 饮用水接触许可
特性 • 尺寸稳定性良好 • 耐化学品性能,良好
• 高刚性 • 食品接触的合规性
用途 • 泵件 • 工业应用
• 阀门/阀门部件 • 消费品应用领域
机构评级 • ACS DGS/VS 4 n° 2000-232 • EC 1907/2006 (REACH) • NSF 61
• WRAS BS6920-1: 2000 and
• DVGW W270 • KTW Guidelines
2014
RoHS 合规性 • RoHS 合规
外观 • 黑色
形式 • 粒子
加工方法 • 注射成型
树脂 ID (ISO 1043) • PA610-GF50
物理性能 干燥 调节后的 单位制 测试方法
密度 1.50 -- g/cm³ ISO 1183/A
收缩率 ISO 294-4
垂直 0.70 -- %
流动 0.20 -- %
吸水率 ISO 62
24 hr, 23°C 0.24 -- %
饱和, 23°C 2.0 -- %
机械性能 干燥 调节后的 单位制 测试方法
拉伸模量 (23°C) 16000 12800 MPa ISO 527-2/1A
拉伸应力 (断裂, 23°C) 200 153 MPa ISO 527-2/1A
拉伸应变 (断裂, 23°C) 3.6 5.0 % ISO 527-2/1A
弯曲模量
23°C 11800 -- MPa ASTM D790
23°C 13900 -- MPa ISO 178
弯曲强度
23°C 294 -- MPa ASTM D790
23°C 330 -- MPa ISO 178
冲击性能 干燥 调节后的 单位制 测试方法
简支梁缺口冲击强度 (23°C) 17 -- kJ/m² ISO 179/1eA
简支梁无缺口冲击强度 3 (23°C) 90 -- kJ/m² ISO 179/1eU
悬壁梁缺口冲击强度 (23°C) 15 -- kJ/m² ISO 180
 
TECHNYL eXten® D 219WFC V50 BLACK
聚酰胺 610
Solvay Engineering Plastics
热性能 干燥 调节后的 单位制 测试方法
热变形温度 (1.8 MPa, 未退火) 208 -- °C ISO 75-2/Af
熔融温度 225 -- °C ISO 11357-3
电气性能 干燥 调节后的 单位制 测试方法
表面电阻率 6.1E+16 -- ohms IEC 60093
体积电阻率 2.6E+15 -- ohms•cm IEC 60093
介电强度 (2.00 mm) 26 -- kV/mm IEC 60243-1
相对电容率 3.70 -- IEC 60250
漏电起痕指数 (解决方案 A) 600 -- V IEC 60112
可燃性 干燥 调节后的 单位制 测试方法
UL 阻燃等级 UL 94
1.6 mm HB --
3.2 mm HB --
灼热丝易燃指数 (1.6 mm) 700 -- °C IEC 60695-2-12
注射 干燥单位制
干燥温度 80°C
建议的最大水分含量 0.20%
料筒后部温度 240 到 250°C
料筒中部温度 245 到 255°C
料筒前部温度 255 到 265°C
模具温度 60 到 90°C
注射说明
The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4h
 
Injection Advice:
 
For reinforced polyamides, Solvay recommends the use of steel with a high content of carbon, and purified for polishing, to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). In the case of high requirements on surface quality a mould temperature of up to 120°C can be considered. 
 
The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design 
 
 
 
 
 
NSF饮用水处理聚酰胺 610P,NSF饮用水处理PA610,PA610 TECHNYL eXten® D 219WFC V50 BLACK塑料是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,ROHS报告,REACH报告  SVHC报告,COA出厂报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123  微信:13549213581     联系电话:13549213581肖生  
 
 
NSF饮用水原料,NSF61饮用水原料,NSF51饮用水原料,NSF14饮用水原料,NSF饮用水ABS,NSF饮用水PP,NSF饮用水TPU,NSF饮用水POM,NSF饮用水PSU,NSF饮用水TPE,NSF饮用水PVDF,NSF饮用水PEI,NSF饮用水PE,NSF61饮用水报告,NSF51饮用水报告,NSF14饮用水报告,NSF饮用水原料物性表,NSF饮用水原料UL黄卡,NSF饮用水原料MSDS报告,NSF饮用水原料SGS报告,NSF饮用水原料ROSH报告,NSF饮用水原料COA出厂报告等相关资料               
 
 
 
 
 
 
 
 
 
 

NSF饮用水原料,NSF61饮用水原料,NSF51饮用水原料,NSF14饮用水原料,NSF饮用水ABS,NSF饮用水POM,NSF饮用水PSU,NSF饮用水PVDF,NSF饮用水PEI,NSF饮用水HDPE,NSF饮用水PA12,NSF饮用水共聚多酯,电话0769-87795123
版权所有:东莞市双帮塑胶原料有限公司    网址:http://www.pa12tr90.com/
  • 粤ICP备12050428号-3

    粤公网安备 44190002001498号